e‑Manual TopContentsHelp
Category
Top » Basic Printer Operations » Usable Paper » Printable Area

Category Top

Usable Paper

Precautions for Paper

Printable Area

Paper Loading and Output

Loading Paper in the Drawer

Attention (Drawer)

Loading Envelopes and Custom Paper Sizes

Loading Paper in the Multi-purpose Tray

Attention (Multi-purpose Tray)

Registering the Paper Size and Type

Configuring the Printer Driver and Printing

Attention (Printer Driver Configuration)

Turning the Printer ON/OFF

Attention (Turning the Printer ON/OFF)

Online and Offline

Canceling a Job

Operations from the Computer

Cancelling from the Printer Control Panel

Outputting Data (Forced Output)

Canceling the Process Currently Being Performed (Soft Reset)

Canceling All the Jobs (Hard Reset)

Checking the Printer Status

Collapse all|Expand all
Printable Area
02K4-035
NOTE
If you want to extend the printable area
Specify the following settings in the printer driver.
UFR II Printer Driver/PCL Printer Driver
1.
Click [Advanced Settings] in the [Finishing] sheet.
2.
Set [Expand Print Region and Print] to [On].
PS Printer Driver
See Help of the PS printer driver.
Depending on the document to be printed, part of the edges of the document may not be printed, or when printing in color the printing on the edges of the paper may be blurred.
Plain Paper/Heavy Paper/Transparency/Label/Index Card
The printable areas are as follows.
(Unit: in. (mm))
Paper Size
A: Left Edge
B: Right Edge
C: Top Edge
D: Bottom Edge
A4
0.24 (6.1)
0.24 (6.1)
0.20 (5.0)
0.20 (5.0)
B5
0.24 (6.1)
0.24 (6.1)
0.20 (5.0)
0.20 (5.0)
A5
0.24 (6.1)
0.24 (6.1)
0.20 (5.0)
0.20 (5.0)
Legal
0.25 (6.4)
0.25 (6.4)
0.20 (5.0)
0.20 (5.0)
Letter
0.25 (6.4)
0.25 (6.4)
0.20 (5.0)
0.20 (5.0)
Executive
0.25 (6.4)
0.25 (6.4)
0.20 (5.0)
0.20 (5.0)
Statement
0.25 (6.4)
0.25 (6.4)
0.20 (5.0)
0.20 (5.0)
Foolscap
0.25 (6.4)
0.25 (6.4)
0.20 (5.0)
0.20 (5.0)
Custom Size
0.25 (6.4)
0.25 (6.4)
0.20 (5.0)
0.20 (5.0)
Index Card
0.39 (10.0)
0.39 (10.0)
0.39 (10.0)
0.39 (10.0)
Envelope
This printer can print on the following area.
You may have to change the printable area before printing, depending on the application you use.