A Portion of the Page Is Not Printed

Perform one of the following solutions according to the cause.

<Cause 1> The setting for the scaling factor is not appropriate.

Solution 1

Perform the following procedure in the printer driver.

1.	Display the [Page Setup] sheet.
2.	Clear the [Manual Scaling] check box.

If the [Manual Scaling] check box is cleared, the scale factor will be set according to [Page Size] and [Output Size] automatically.

Solution 2

Perform the following procedure in the printer driver.

1.	Display the [Page Setup] sheet.
2.	Select the [Manual Scaling] check box, then specify an appropriate scale factor according to the paper size to be used.

<Cause 2> Paper is not loaded properly in the paper drawer or multi-purpose tray.

Solution

Load the paper properly.

<Cause 3> A document with no margins was printed.

Solution 1

Data is printed with a margin of 0.20 in. (5 mm) (0.39 in. (10 mm) for envelopes). Provide a margin around the data.

Solution 2

Perform the following procedure in the printer driver.

1.	Display the [Finishing] sheet.
2.	Click [Advanced Settings].
2.	Set [Expand Print Region and Print] to [On].

Depending on the print data to be printed, the edge of paper may be missing partly during printing or may blot during color printing.