»
Troubleshooting
»
Poor Printout Results
»
The Flap of the Printed Envelope Sticks
|
The Flap of the Printed Envelope Sticks
Perform the following procedure.
<Cause> The envelope is inappropriate.
Solution 1
Replace the envelope with that which can be used with this printer.
"
Usable Paper
"
Solution 2
Set [Special Env. Mode] to [On].
"
[Setup] Menu ([User Maintenance] Options)
"
Normally, use the printer with [Special Env. Mode] set to [Off]. Change the settings only if the described problems occur.
02K4-0KA