|
IMPORTANT
|
|
Receiving E-mails
The printer can receive e-mails only when it is online.
When using POP3 protocol
When it is set to receive e-mail automatically using [POP3 RX Interval], if you attempt to receive e-mail manually while e-mail is being received automatically, your actions will be ignored.
When using SMTP protocol
It automatically receives and prints e-mails. There is no need to manually receive and print them.
|
Printing from the Printer Control Panel
1
Make sure that the printer is online.
If the printer is not online, press [ 
] (
Online).
] (Online). 2
Press [ 
] (
Utility) to display the Utility menu.
] (Utility) to display the Utility menu.3
Press [
] and [
], select [E-Mail Print Utility], and then press [OK].
] and [], select [E-Mail Print Utility], and then press [OK].4
Press [] and [], select [Received E-Mails], and then press [OK].
] and [], select [Received E-Mails], and then press [OK].5
When <Run?> is displayed, press [], select [Yes] and press [OK].
], select [Yes] and press [OK].The printer is connected to the mail server. The printer receives e-mails addressed to the printer and print them.
Printing from a Remote UI
1
Start the Remote UI.
2
Select [Network] under [Preferences] in the [Settings/Registration] menu.
3
Click [E-Mail Print Settings] that is on the right side of [E-Mail RX].
The printer is connected to the mail server. The printer receives e-mails addressed to the printer and print them.
