When SSL Is Enabled, the Remote UI Does Not Start, or the IPP Printing Cannot Be Performed
Perform the following procedure.
<Cause> The file related to key management is broken.
|
Solution
|
Perform the following procedure.
|
1.
|
Select [Network] → [Remote UI Settings] → [SSL] using the control panel, and then make sure that [SSL] is set to [Off].
|
|
2.
|
Restart the printer.
|
|
3.
|
Regenerate the key and certificate and specify the settings for SSL from the Remote UI.
|
|
4.
|
Restart the printer.
|
|