Data Is Reduced and Printed

Perform the following procedure.

<Cause> The setting for the scaling factor is not appropriate.

Solution 1

Perform the following procedure in the printer driver.

1.	Display the [Page Setup] sheet.
2.	Clear the [Manual Scaling] check box.

If the [Manual Scaling] check box is cleared, the scale factor will be set according to [Page Size] and [Output Size] automatically.

Solution 2

Perform the following procedure in the printer driver.

1.	Display the [Page Setup] sheet.
2.	Select the [Manual Scaling] check box, then specify an appropriate scale factor according to the paper size to be used.