» Troubleshooting » Poor Printout Results » Square Areas That Cannot Be Seen on the Display Appear around Lines or Text and Are Printed in a Different Color from the Other Areas
|
Square Areas That Cannot Be Seen on the Display Appear around Lines or Text and Are Printed in a Different Color from the Other Areas
Perform the following procedure.
<Cause> A process that is different from the specified halftone process or color process may be applied depending on the operating system or application.
Solution 1
Perform the following procedure in the printer driver.
UFR II Printer Driver
1.
Display the [Quality] sheet.
2.
Click [Advanced Settings].
3.
Set [Gray Compensation] to [All] or [Disabled].
PCL Printer Driver
See Help of the PCL printer driver.
You can specify the same setting from the printer's control panel.
Solution 2
Perform the following procedure in the printer driver.
UFR II Printer Driver
1.
Display the [Quality] sheet.
2.
Click [Advanced Settings].
3.
Set [Halftones] to [Resolution] or [Gradation].
PCL Printer Driver
See Help of the PCL printer driver.
You can specify the same setting from the printer's control panel.
Solution 3
Perform the following procedure in the printer driver.
UFR II Printer Driver
1.
Display the [Quality] sheet.
2.
Select the [Manual Color Settings] check box.
3.
Click [Color Settings].
4.
Display the [Matching] sheet.
5.
Set [Matching Method] for [Text], [Graphics], and [Images] to the same settings.
PCL Printer Driver
See Help of the PCL printer driver.
You can specify the same setting from the printer's control panel.
02K4-0JU