Fill Patterns and Borders Are Not Printed in the Correct Color (Specified Color) Even When the Same Color Is Specified for Them

Perform the following procedure.

<Cause> A special process may be applied depending on the line width of the border so that thin lines are printed clearly.

Solution 1

Perform the following procedure in the printer driver.

1.	Display the [Quality] sheet.
2.	Select the [Manual Color Settings] check box.
3.	Click [Color Settings].
4.	Display the [Matching] sheet.
5.	Set [Matching Method] for [Text] and [Graphics] to the same settings.

You can specify the same setting from the printer's control panel.

Solution 2

Perform the following procedure in the printer driver.

1.	Display the [Quality] sheet.
2.	Select the [Manual Color Settings] check box.
3.	Click [Color Settings].
4.	Display the [Matching] sheet.
5.	Select [Gamma Adjustment] in [Matching Mode].
6.	Change the gamma value for [Gamma].

The larger the value is, the darker in color the data is printed.

You can specify the same setting from the printer's control panel.