» Troubleshooting » Poor Printout Results » Shaded Patterns Are Not Printed in the Correct Color (Specified Color)
|
Shaded Patterns Are Not Printed in the Correct Color (Specified Color)
Perform the following procedure.
<Cause> The shaded pattern of the print data and the dither pattern of the printer are interfering with one another.
Solution 1
Print again without specifying a shaded pattern in the application.
See the instruction manual supplied with the application.
Solution 2
Perform the following procedure in the printer driver.
1.
Display the [Quality] sheet.
2.
Click [Advanced Settings].
3.
Set [Halftones] to [Gradation].
You can specify the same setting from the printer's control panel.
Solution 3
Perform the following procedure in the printer driver.
1.
Display the [Quality] sheet.
2.
Click [Advanced Settings].
3.
Set [Halftones] to [Error Diffusion].
You can specify the same setting from the printer's control panel.
02K4-0JL