The Printer Takes a Long Time to Start the Print Job

Perform one of the following solutions according to the cause.

<Cause 1> The printer is cooling down to maintain print quality. (Especially after narrow paper is printed)

Solution

Wait a moment. The printer automatically cools down the inside. After cooling is completed, the printer resumes printing.

<Cause 2> This problem may occur in some applications depending on the processing type of the print data. (Windows 2000/XP/Server 2003)

Solution

If you are using the PCL/UFR II printer driver, performing the following procedure may be able to solve the problem.

UFR II Printer Driver

1.	Display the [Finishing] sheet.
2.	Click [Advanced Settings].
3.	Change the [EMF Spooling] setting.

PCL Printer Driver
See Help of the PCL printer driver.