The Print Server for Connection Cannot Be Found

Perform one of the following solutions according to the cause.

<Cause 1> The LAN cable is not connected properly.

Solution

Connect the print server to the client computer with the LAN cable properly.

<Cause 2> The print server has not been started up.

Solution

Start up the print server.

<Cause 3> The printer is not specified as a shared printer.

Solution

Specify the printer as a shared printer.

For details, see the following item in "Printer Driver Installation Guide."

"Installation" - "Print Server Settings"

For details on the procedure for viewing "Printer Driver Installation Guide", see "Installation."

<Cause 4> The user does not have permission to access the print server or printer.

Solution

Ask your network administrator to change the user permissions.

<Cause 5> [Network discovery] is not enabled. (Windows Vista, 7, and Server 2008)

Solution

Perform either of the following procedures.

1.	From the [Start] menu, select [Control Panel].
2.	Click [View network status and tasks].
3.	Set [Network discovery] to [On].

1.	From the [Start] menu, select [Control Panel].
2.	Click [View network status and tasks].
3.	Click [Change advanced sharing settings].
4.	Specify [Turn on network discovery] in [Network discovery].

1.	From the [Start] menu, select [Control Panel].
2.	Double-click [Network and Sharing Center].
3.	Set [Network discovery] to [On].