Specifying Times and Performing Automatic Calibration
Full calibration can be performed automatically at a specified time every day.
1
Press [
![](./images/book_images/pubnumbers/USRM1-9572/b_KET050_L.gif)
] (
![](./images/book_images/pubnumbers/USRM1-9572/b_C211.gif)
Settings).
2
Select [Control Menu] using [
![](./images/book_images/pubnumbers/USRM1-9572/b_key_up.gif)
] and [
![](./images/book_images/pubnumbers/USRM1-9572/b_key_down.gif)
], and then press [OK].
3
Select [Timer Settings] using [
![](./images/book_images/pubnumbers/USRM1-9572/b_key_up.gif)
] and [
![](./images/book_images/pubnumbers/USRM1-9572/b_key_down.gif)
], and then press [OK].
4
Select [Calibration Timer] using [
![](./images/book_images/pubnumbers/USRM1-9572/b_key_up.gif)
] and [
![](./images/book_images/pubnumbers/USRM1-9572/b_key_down.gif)
], and then press [OK].
5
Select [On] using [
![](./images/book_images/pubnumbers/USRM1-9572/b_key_up.gif)
] and [
![](./images/book_images/pubnumbers/USRM1-9572/b_key_down.gif)
], and then press [OK].
6
Select [Calibration Time] using [
![](./images/book_images/pubnumbers/USRM1-9572/b_key_up.gif)
] and [
![](./images/book_images/pubnumbers/USRM1-9572/b_key_down.gif)
], and then press [OK].
7
Set the time for calibration to be performed automatically, and press [OK].
You can increase or decrease the value using [
![](./images/book_images/pubnumbers/USRM1-9572/b_key_up.gif)
] or [
![](./images/book_images/pubnumbers/USRM1-9572/b_key_down.gif)
], and move the position using [
![](./images/book_images/pubnumbers/USRM1-9572/b_key_left.gif)
] and [
![](./images/book_images/pubnumbers/USRM1-9572/b_key_right.gif)
].
If calibration is not automatically performed
In the following cases calibration will not be performed even if [Calibration Timer] is set to [On].
When it is receiving data and printing
When operating the control panel
|