|
NOTE
|
|
If your computer and the printer are connected via the router
You cannot set the IP address using the ARP/PING command.
|
1
Run Command Prompt.
|
NOTE
|
||||||
|
If you are using Windows
Run Command Prompt using the following procedure.
From the [Start] menu, select [All Programs] or [Programs] → [Accessories] → [Command Prompt].
If you are using Macintosh
Perform the following procedure.
If you are using UNIX
Display the console screen, and then log in as a super user.
|
2
Enter "arp -s <IP address> <MAC address>", then press the [ENTER] key on your keyboard.
|
<IP address>:
|
Enter the IP address to assign to the printer.
Specify the address with four numbers (from 0 to 255) separated with a period (.).
|
|
<MAC address>:
|
Enter the MAC address of the printer.
When entering the number, separate the number every two digits with a hyphen (-) (a colon (:) for Macintosh/UNIX). |
|
Input Example (Windows):
|
"arp -s 192.168.0.215 00-1E-8F-46-80-2e"
|
|
Input Example (Macintosh/UNIX):
|
"arp -s 192.168.0.215 00:1E:8F:46:80:2e"
|
|
NOTE
|
|
If you are using IBM-AIX
Enter "arp -s ether <the IP address> <the MAC address>."
|
3
Enter the following command, then press the [ENTER] key on your keyboard.
|
If you are using Windows:
|
"ping <the IP Address> -l 479"
|
|
If you are using Macintosh:
|
"ping -c 1 -s 479 <the IP Address>"
|
|
If you are using Solaris 1.x/2.x:
|
"ping -s <the IP Address> 479"
|
|
If you are using IBM-AIX:
|
"ping <the IP Address> 479"
|
|
If you are using HP-UX:
|
"ping <the IP Address> 487"
|
|
If you are using Linux:
|
"ping -s 479 <the IP Address>"
|
|
<IP address>:
|
Enter the same IP address as the one entered in Step 2.
|
 |
Enter a lowercase "L" for "-l."
|
 |
Input Example (Windows): "ping 192.168.0.215 -l 479"
|
→
|
The IP address is set for the printer.
|
|
|
The subnet mask and gateway address are set to [0.0.0.0].
|
4
Enter "exit", then press the [ENTER] key on your keyboard.
|
→
|
Command Prompt closes.
|