» Configuring the Network Settings (Sharing the Printer) » Network Settings for the Printer (Common to Each Protocol) » Setting IEEE802.1X Authentication
|
Setting IEEE802.1X Authentication
Specify the settings for using IEEE802.1X authentication with the printer.
See the following sections according to the protocol to be used for authentication.
IMPORTANT
Conditions for Using IEEE802.1X Authentication
In order to use IEEE802.1X authentication, an authentication server (RADIUS server) is required.
NOTE
IEEE802.1X Authentication Protocol
The printer supports TLS, TTLS and PEAP IEEE802.1X authentication.
TLS performs mutual authentication using the certificate sent from the authentication server and the certificate set in the printer.
TTLS and PEAP perform mutual authentication using the certificate sent from the authentication server and the user name and password set in the printer.
You can set TLS, TTLS and PEAP at the same time, but the authentication system that is actually used over the network is determined by the authentication server settings.
IEEE802.1X Authentication Settings
We recommend that network settings be performed by the network administrator.
02K4-0CC