» Useful Printing Functions » Receiving E-mail Data on the Mail Server and Printing (E-mail Print) » How to Specify the Settings for E-mail Print » Attention (How to Specify the Settings for E-mail Print)
|
Attention (How to Specify the Settings for E-mail Print)
The following are settings for printing e-mails.
You can set them from the printer control panel, Remote UI or FTP client.
: Can be specified: Cannot be specified
Settings for Using the POP3 Protocol
Option
Setting
Setting Method
Control Panel
Remote UI
FTP Client
POP3 Server Name
Specifies the name or sets the IP address of the server which receives e-mails.
POP3 User Name
Specifies the name of the user which receives e-mails.
POP3 Password
Specifies the password for the name of the user which receives e-mails.
POP3 RX Interval
Set the interval for automatically connecting to the server that receives e-mails in minute units. Receive e-mail at specified intervals and print it automatically.
POP3 RX
Specifies whether to enable the e-mail print function.
POP3 Server Port Number
Specifies the port number for the server which receives e-mails.
E-Mail RX
Performs manual receiving of e-mails.
Settings for Using the SMTP Protocol
Option
Setting
Setting Method
Control Panel
Remote UI
FTP Client
SMTP RX
Select whether to enable the e-mail printing function. When it is enabled, e-mail is automatically received and printed.
SMTP Server Port Number
Specifies the port number for the server which receives e-mails.
Other Settings
Option
Setting
Setting Method
Control Panel
Remote UI
FTP Client
E-Mail Print Log
Prints e-mail print logs.
Show Warnings
Specifies whether a message should appear or any indicator should blink when a reception error has occurred on printing e-mails.
Print E-Mail Text
Specifies whether the printer should print the text on printing e-mails.
Limit E-Mail Print
Specifies whether to limit the number of the print pages of e-mail text.
02K4-06W