You can print two pages of a document on each side of each sheet, then fold the sheets in half to create a booklet.
|
Paper Type
|
Paper Size
|
|
Plain paper
(16.0 to 23.9 lb Bond (60 to 90 g/m²))
Heavy paper
(24.0 lb Bond to 60.3 lb Cover (91 to 163 g/m²))
|
Standard size:
A4, Legal, Letter |
|
IMPORTANT
|
|
Do not touch the paper during booklet printing until it is output completely. The paper is first output partially after the front side is printed, and then it is fed again to be printed on the reverse side.
Be sure to close the output selection cover before performing booklet printing.
|
1.
Click [Finishing].
For instructions on how to display the printer driver screen see "Printing with the Printer Driver" or "Configuring the Print Settings Beforehand."
2.
Select [Booklet Printing] from [Print Style].
You can also configure detailed settings such as the opening direction and gutter width for booklet printing in the [Detailed Settings for Booklet] dialog box, displayed by clicking [Booklet].
The output image is displayed in the preview area.
|
NOTE
|
|
For details about the various settings in the [Detailed Settings for Booklet] dialog box, view the online help. (See "Viewing the Online Help.")
|
3.
Click [OK].
|
NOTE
|
|
You cannot specify the [Finishing] options in the [Finishing] sheet when performing Booklet Printing.
The display may vary according to the operating system, as well as the type and version of the printer driver.
|